To complete your installation, MoTeC has a large range of products available, all designed and/or tested to ensure they work well with your data logger.
To configure the ACL, a communication cable is required to connect to a PC. For the ACL an Ethernet to 5 pin Autosport crossover cable is required to connect the ACL to the Ethernet port on the PC.
For inputs and outputs several expander units can be connected to the logger. The VIM Versatile Input Module is specifically designed to work with the ACL.
To display logged and calculated information to the driver, connect the ACL to any MoTeC display.
The BR2 Beacon Receiver can be connected to the ACL, for lap timing as well as calculation features such as lap time gain/loss, fuel used per lap and fuel predictions.
The CAN-based SLM Shift Light Module.
Connect sensors to the ACL via a VIM expander.
Lambda sensors, position sensors, force and motion sensors, pressure sensors, temperature sensors and speed sensors.
Radio or GSM modems to send the logged data to a computer in the pit garage to view live in the pits while the vehicle is still on track.
GPS units specifically adapted to suit MoTeC devices.
Useful Links View MoTeC webinars on Data Acquisition & Analysis