The MDD input kit allows connection of up to five push button or rotary analogue switches.

The kit is perfect for putting driver adjustable trim pots and buttons within easy reach of the driver. For example steering wheel mounted knobs for boost, fuel or ignition trims and push buttons for fuel reset or dual RPM limit.

The values that the driver selects via the knobs and buttons are sent to the controlling data logger or ECU via CAN. This eliminates the need for additional wiring and does not require any inputs.

The MDD input kit includes:
• 1 x input loom, unterminated
• 1 x MDD replacement back cover

Compatible with

• all MoTeC data loggers

• the 'hundred series' ECUs (software version V3.4 and later)

You can click on the part number to download the datasheet.

	Description	Part No (data sheet)
	MDD input kit	#61115

Typical Application

The image below shows the MDD mounted on a steering wheel with an SLM. The use of the MDD input kit allows the push buttons and rotary switch to be connected. Both the MDD and SLM are connected via CAN, and as such only require four wires.