Full Screen and COMS, DOSBOX easy open program M48 etc

Discussion and support for MoTeC's earlier generation ECUs

Full Screen and COMS, DOSBOX easy open program M48 etc

Postby cobra427 on Tue Mar 03, 2020 2:08 pm

Hi , I have an old M48 , if you want your program to load directly into full screen please download Dosbox 0.74 and add a screen shortcut , now to make it work .
Click start in the corner
Click all programs , then DOSbox 0.74 then click on options, then open dosbox0.74-3 options
This should give you the white screen ,(notepad screen ).
enlarge screen
now look down the page and it says
fullscreen =false this needs to be changed to fullscreen=true

now go nearly to bottom of the page
look for
serial1=dummy this line needs to read serial1=directserial realport:com1
serial2=dummy
serial 3=disabled
etc
and at the bottom of the page where it says you can put your mount lines here , under that line put
mount c c:\motec
c:
motec.bat

then you must go to File and SAVE .
all in lower case the gaps or no gaps are important. now when you double click the dosbox it should load up full screen and the serial port will connect , You can rename dosbox shortcut Motec , after exiting Alt X, you may need to push the windows button . I would be great to hear, if you have set this up . You will still have you original progam and tune , but the Dosbox will be nicer to use and your files/ tune will come up in there the same Cheers . :)
cobra427
 
Posts: 1
Joined: Tue Mar 03, 2020 4:15 am

Return to M4 and M48 ECUs (including M2R and MLS variants)

Who is online

Users browsing this forum: No registered users and 6 guests