pdm15+keypad turnoff output help

Discussion and support for MoTeC Power Distribution Modules

pdm15+keypad turnoff output help

Postby slmawi on Sat Aug 07, 2021 3:42 pm

hello
need help spend 4 hour try many method can't get it right
every thing work but only problem i want to solve is

when i press ign (keypad button 1) i can turn on all keypad buttons as master
when turn off ign button turn off all output , problem is when press again ign button not reset the output what was active turn on again and want it off only ign button is on

example:
ign button + fan button active output on
ign button off = fan output off
press again ign button only = fan turn on ,i want to be off reset

i attach the file
thanks
Attachments
FT600 new wiring.pdm
(119.68 KiB) Downloaded 193 times
slmawi
 
Posts: 2
Joined: Mon Nov 28, 2016 11:17 pm

Re: pdm15+keypad turnoff output help

Postby adrian on Mon Aug 09, 2021 10:28 am

The Master Shutdown isn't a reset, it simply turns off the outputs that are configured to use it when your Master Shutdown condition is true. When it becomes false the outputs will turn back on if the conditions that drive them are still true.

If you want a reset button you should use it to reset your functions. So for example your "Function-IGN" function has a toggle based on an ignition button. Add your keypad reset button to the reset of this toggle (see below).
Attachments
PDM Toggle Reset.png
PDM Toggle Reset.png (45.18 KiB) Viewed 1723 times
adrian
MoTeC
 
Posts: 699
Joined: Mon Apr 13, 2015 4:16 pm

Re: pdm15+keypad turnoff output help

Postby slmawi on Mon Aug 09, 2021 9:13 pm

thanks for advice its work

thanks
slmawi
 
Posts: 2
Joined: Mon Nov 28, 2016 11:17 pm


Return to PDM15 PDM16 PDM30 and PDM32

Who is online

Users browsing this forum: No registered users and 1 guest