Cdi8 in stand alone mode

Includes MoTeC CDIs, Ignition Expanders

Cdi8 in stand alone mode

Postby PetarL on Wed May 24, 2017 11:39 pm

In the cdi8 brochures is suggests it will work via a single output link to the ecu but also
Suggests it will work in stand alone mode as well with a "windows spark management software"

I have hunted around everywhere I could to find information on the wiring or the setup in stand alone more but with no luck at all.

Has anyone done this? I'm looking at running 8coil setup on a carb small block chev

Thanks
PetarL
 
Posts: 8
Joined: Mon May 22, 2017 5:29 pm

Re: Cdi8 in stand alone mode

Postby SDean on Thu May 25, 2017 8:09 am

Hi,

Can you please point me in the direction of this brochure, as that is not mentioned on our datasheets for the CDI.

We have two different CDI-8's, one being the single input M800 compatible version (p/n 14004), and the other the M1 compatible unit (p/n 14015) that has 8 separate inputs.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 792
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne

Re: Cdi8 in stand alone mode

Postby PetarL on Thu May 25, 2017 9:27 am

Hi dean

http://www.motecusa.com/catalog/Section10.pdf

Thanks for the quick reply.

This is the cdi8 with autosport connector m800 version
PetarL
 
Posts: 8
Joined: Mon May 22, 2017 5:29 pm


Return to Ignition systems

Who is online

Users browsing this forum: No registered users and 1 guest

cron