bosch brake sensor pss-260 calibration needed

MoTeC supplied sensors, valves or wiring discussion

bosch brake sensor pss-260 calibration needed

Postby pold9000 on Mon Jun 13, 2016 10:24 am

hello
i only find a datasheet but there are no values for to calibration included.

please can you provide with the values or a file for the adl2

bye
wolfgang
pold9000
 
Posts: 7
Joined: Mon May 30, 2016 12:40 pm

Re: bosch brake sensor pss-260 calibration needed

Postby SDean on Tue Jun 14, 2016 8:18 am

Hi Wolfgang,

We do not have a calibration for that sensor, we can do one if you would like to send it to us, via your local dealer.

According to the datasheet that Bosch has for the sensor, you should have 0.500V as 0bar Absolute, and 4.5V as 260bar for a calibration. This is a linear scale, so you only need these two numbers. Put them into your calibration in the dash, and you should read 1bar as the output when the sensor is exposed to free air.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 748
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne

Re: bosch brake sensor pss-260 calibration needed

Postby pold9000 on Tue Jun 14, 2016 10:29 pm

ok i have entered this values

the only problem i have i must use 2 decimal in the "practice" view

bye
wolfgang
pold9000
 
Posts: 7
Joined: Mon May 30, 2016 12:40 pm


Return to Sensors, Valves and Wiring

Who is online

Users browsing this forum: No registered users and 4 guests