blanking cap for CAN connector

Includes expansion units, sensors, valves, wiring, communication cables etc.

blanking cap for CAN connector

Postby otto69 on Sun Dec 22, 2013 8:43 pm

Hi
Have tried a search, but can't seem to locate a blanking or dust cap for the CAN connector. The female one that the UTC plugs into. Is there such an animal or do I have to make one ?
Is there a generic name for that type of connector ?
cheers

Clayton
otto69
 
Posts: 52
Joined: Wed Dec 09, 2009 7:14 pm

Re: blanking cap for CAN connector

Postby pftuning on Mon Dec 23, 2013 12:58 am

They are compatible with XLR-5 pin connectors (Switchcraft A5F mates with it).
Image
http://www.newark.com/switchcraft/a5f/connector-xlr-jack-5pos/dp/39F2274
I've never seen a blanking cap, but it's possible it exists.
Peter Florance
PFTuning
Virginia Beach, VA 23454
http://www.pftuning.com
pftuning
 
Posts: 32
Joined: Fri May 06, 2011 11:04 am

Re: blanking cap for CAN connector

Postby otto69 on Mon Dec 23, 2013 7:25 pm

Thanks Peter
Great info.
I might just turn up a plastic cap then.

Clayton
otto69
 
Posts: 52
Joined: Wed Dec 09, 2009 7:14 pm

Re: blanking cap for CAN connector

Postby chelspeed on Sat Jan 11, 2014 4:35 am

How about this one from Farnell.

Is this the right gender? Mines been butchered and hard wired into the car with a usb socket to plug into so I can't tell.
chelspeed
 
Posts: 45
Joined: Sun Jul 13, 2008 6:17 pm

Re: blanking cap for CAN connector

Postby otto69 on Sun Jan 12, 2014 9:17 pm

Thanks mate
Looking at the drawing it should fit, the bore of the bulkhead connector is 20.5mm.
I ended up finding a plastic blanking cap that fitted without having to make one.
cheers
otto69
 
Posts: 52
Joined: Wed Dec 09, 2009 7:14 pm


Return to Accessories and other MoTeC products

Who is online

Users browsing this forum: No registered users and 3 guests