Oversteer maths formula

Discussion and support for i2 Standard and i2 Pro applications

Re: Oversteer maths formula

Postby ToddG on Sat Mar 14, 2020 5:08 am

I thought I would clarify one item of interest if the reader is using i2 Standard.

The "Oversteer" and "Oversteer (Speed Weighted)" math channels in i2 Standard works if the required channels are given to the math channel (regardless of the source).

Use Test -> Channel Status menu; or read the math channel to see the required channels. Remember the channel title has to be exactly the same e.g. "Steered Angle".

MoTeC i2 software is so good I bought a new L120 after months of using i2 Pro with iRacing and Assetto Corsa Competizione. So supporting the sim racers does sell hardware!
Posts: 5
Joined: Sun Feb 16, 2020 12:35 am


Return to i2 Data Analysis Software

Who is online

Users browsing this forum: No registered users and 2 guests