GPS-L10 / OUTPUT Format

Information about using GPS units with motec devices

GPS-L10 / OUTPUT Format

Postby Jakob on Fri Jan 06, 2012 5:24 am

Hello,

I need a 10-Hz-GPS for my University-Project.

I'm wondering what Format the output of the GPS-L10 is. Is it NMEA or something proprietary?

Thanks!

Jakob
Jakob
 
Posts: 12
Joined: Thu Mar 24, 2011 2:56 am

Re: GPS-L10 / OUTPUT Format

Postby Jakob on Fri Jan 06, 2012 5:31 am

OK ... found the information in the data sheet :)

RMC, GGA (MoTeC default)


Is it possible to change this?
Jakob
 
Posts: 12
Joined: Thu Mar 24, 2011 2:56 am

Re: GPS-L10 / OUTPUT Format

Postby Jakob on Fri Jan 06, 2012 5:41 am

What's the rs232 data format for the GPS-L10?

x-data bits, parity, stop bit?
Jakob
 
Posts: 12
Joined: Thu Mar 24, 2011 2:56 am

Re: GPS-L10 / OUTPUT Format

Postby JamieA on Fri Jan 06, 2012 11:08 am

The GPS-L10 RS232 output format is a standard NMEA output format.

RMC
GGA

The baude rate is 38400

you shouldnt need to worry about the other settings, but it is
8 data bits
1 stop bit
No parity
No flow control
JamieA
 
Posts: 454
Joined: Wed Apr 30, 2008 2:16 pm
Location: Melbourne, Australia


Return to GPS Information

Who is online

Users browsing this forum: No registered users and 1 guest

cron