Q on Lambda

Forum for general discussions on engine tuning, not specific to a particular motec ECU

Q on Lambda

Postby CarloL on Sat Jun 09, 2018 2:32 am

Maybe not the forum to ask, I have an M130 LTC and Bosch LSU

I searched here and online, could not find any answer

From factory the car has a narrow band sensor , adding the wideband ; will this make the OE narrow band obsolete or would the ECU still make use of the OE narrow band?

I presume unplugging the OE unit will have zero affect to the ECU

As per motec website , is it correct I need to calibrate my wideband sensor every X km ; will the ECU indicate if the sensor needs replacing or are you best going by mileage
CarloL
 
Posts: 101
Joined: Thu Nov 05, 2015 1:00 am

Re: Q on Lambda

Postby SDean on Tue Jun 12, 2018 1:33 pm

Hi Carlo,

If you have a Wide Band Lambda Sensor, you do not need the narrow band sensor. The M130 doesn't have support for narrow band operation anyway.

I have done testing on the lambda in my car, and whilst there is a small variation in the final calibration numbers generated between the free air calibration of new sensor to one that has done a fair amount of work, it is a very minor variance (less than 0.01 lambda) and the injector PW's didn't change before and after doing the calibration.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 745
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne


Return to Tuning discussions

Who is online

Users browsing this forum: No registered users and 3 guests