Suzuki GSX 1100 Best trigger wheel to use

Discussion and support for MoTeC's new entry level ECUs

Re: Suzuki GSX 1100 Best trigger wheel to use

Postby SprinterTRD on Mon May 18, 2020 12:06 pm

harky wrote:pm me , i will email you photos
having no luck posting any
I think you can use a crank only sensor , but that will limit you to non sequential injection


Yes, but you would need to run a missing or additional tooth crank sensor. But you will need to run waste spark on your coils

Press F1 in the software for more help.
SprinterTRD
Pro User
 
Posts: 319
Joined: Wed Jul 16, 2008 8:24 am

Re: Suzuki GSX 1100 Best trigger wheel to use

Postby Screwriverracing on Tue May 19, 2020 4:11 am

Thanks sprintertrd,
That was going to be my next question, I was going to use a 12 tooth wheel of a Kawasaki zzr1400 as this will fit quite easily without to much trouble, then I was wondering how the ecu would no when the engine was a tdc with out the cam sensor.
Would a 12 - 1 wheel work?
This way I could get it up and running with just swapping the wiring from my existing ecu for now.
Cheers SRR
Screwriverracing
 
Posts: 15
Joined: Tue May 05, 2020 8:30 am

Re: Suzuki GSX 1100 Best trigger wheel to use

Postby SprinterTRD on Tue May 19, 2020 8:42 am

I think you will have issues with 12-1 mainly during cranking. Check the help file for the minimum teeth required.

Additional tooth may be a better option
SprinterTRD
Pro User
 
Posts: 319
Joined: Wed Jul 16, 2008 8:24 am

Re: Suzuki GSX 1100 Best trigger wheel to use

Postby Screwriverracing on Fri May 22, 2020 8:23 am

And next,
Does anyone know what injectors these are
IMAG0501-20200510-151117371.jpg
IMAG0501-20200510-151117371.jpg (488.33 KiB) Viewed 2380 times

Number on them is D3183BA.
Cheers SRR
Screwriverracing
 
Posts: 15
Joined: Tue May 05, 2020 8:30 am

Re: Suzuki GSX 1100 Best trigger wheel to use

Postby Screwriverracing on Thu Aug 13, 2020 3:55 am

Have found a bike running the zzr 12 -1 wheel, but also has a cam sensor on M84.
Would it be possible to run it without a cam sensor non sequential and wasted spark?
Cheers SRR.
Screwriverracing
 
Posts: 15
Joined: Tue May 05, 2020 8:30 am

Re: Suzuki GSX 1100 Best trigger wheel to use

Postby SDean on Mon Aug 17, 2020 11:27 am

Hi,

I do not have any information for that injector part number.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 778
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne

Re: Suzuki GSX 1100 Best trigger wheel to use

Postby Screwriverracing on Fri Sep 25, 2020 6:01 am

Right,
To awkward to fit a cam sensor, so how about a Drive of the end of the crank and geared the same as the cams with a sensor on that?
Will it work?
Cheers SRR
Screwriverracing
 
Posts: 15
Joined: Tue May 05, 2020 8:30 am

Re: Suzuki GSX 1100 Best trigger wheel to use

Postby harky on Fri Sep 25, 2020 2:06 pm

there is no reason why that won’t work , you can get CRIP from that

the photos of the cam sensor i did on the Kawaka GPZ. don’t do the fit justice ( mainly because the photo was upside down—- (. always have your i phone or ipad with the home button on the right or bottom )
the cam cover is Magnesium , which required special tig welding.
simple is best —- , keep at it.
if it helps. give me your email , i can send much better photos —— much easier than posting here
cheers
harky
harky
 
Posts: 45
Joined: Tue Aug 12, 2008 5:41 pm
Location: adelaide

Re: Suzuki GSX 1100 Best trigger wheel to use

Postby Screwriverracing on Sat Oct 03, 2020 12:55 am

Hi Harky,
You have a pm with my email on.
Cheers SRR
Screwriverracing
 
Posts: 15
Joined: Tue May 05, 2020 8:30 am

Previous

Return to M84 ECUs

Who is online

Users browsing this forum: No registered users and 5 guests

cron