Injector and Ignition Coil setups in M150 for RE 500cc

Discussion and Support for MoTeC's M1 series ECUs

Re: Injector and Ignition Coil setups in M150 for RE 500cc

Postby SDean on Fri Feb 14, 2020 9:31 am

Correct, selecting the calibration from the drop down list loads the required settings for that calibration.

The wiring looks correct for the fuel pump.

With the ignition coils, you need to have two electrical paths for them to work correctly, the first is from the battery to the coil, and then back to the battery, and the second is from the coil, through the spark plug into the cylinder head and then back to the coil, thus the two different pins.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 747
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne

Previous

Return to M1 ECUs

Who is online

Users browsing this forum: No registered users and 6 guests