C125 to Pectel GCU

information about how to make an ECU (MoTeC or non MoTeC) work with a MoTeC dash or data logger

C125 to Pectel GCU

Postby MichaelLee on Wed Jan 22, 2014 3:41 pm

The Pectel GCU require some data from C125 Dash by CAN Bus. But I am not familiar with CAN setup. Could you tell me how to setup the transmit of CAN? I have attached the CAN information of Pectel GCU. The GCU require data: Rpm, Gear,TPS. Thanks.
Attachments
Pectel GCU to ECU CAN Link.pdf
(88.72 KiB) Downloaded 546 times
MichaelLee
 
Posts: 11
Joined: Fri Sep 12, 2008 12:20 pm

Re: C125 to Pectel GCU

Postby AlanB on Fri Jan 24, 2014 2:46 am

Hi, if you give me your email address I will send you a C125 configuration file with the CAN Tx setup.
Alan Bell
MoTeC Europe Ltd
User avatar
AlanB
 
Posts: 93
Joined: Tue May 20, 2008 10:25 pm

Re: C125 to Pectel GCU

Postby MichaelLee on Fri Jan 24, 2014 1:36 pm

Thanks, Alan. I have pm to you
MichaelLee
 
Posts: 11
Joined: Fri Sep 12, 2008 12:20 pm

Re: C125 to Pectel GCU

Postby AlanB on Fri Jan 24, 2014 6:19 pm

Config sent Michael, I hope it helps.
Alan Bell
MoTeC Europe Ltd
User avatar
AlanB
 
Posts: 93
Joined: Tue May 20, 2008 10:25 pm


Return to ECU to Dash Comms

Who is online

Users browsing this forum: No registered users and 1 guest