Comm Problem between ECU and Dash Manager

information about how to make an ECU (MoTeC or non MoTeC) work with a MoTeC dash or data logger

Comm Problem between ECU and Dash Manager

Postby azhar on Thu Jan 11, 2018 6:13 pm

While working with Nissan Patrol Super Safari 2017 Model car,i faced a difficulty in retreieving the vehicle speed of the car.
In M1 its working but in the monitor Channels option of the Dash Manager C1212 its not working,I think there is a communication problem with the Stock ECU(shared) and the CAN Bus.

How to solve this out?
Please Help..

Azhar
azhar
 
Posts: 6
Joined: Thu Dec 21, 2017 3:57 pm

Re: Comm Problem between ECU and Dash Manager

Postby David Ferguson on Fri Jan 12, 2018 4:45 am

How have you configured the channels you are not receiving? Have you tried getting them from the M1 CAN data since it seems to be working?
David Ferguson
Veracity Racing Data
Check out Shift RPM - https://shiftrpm.veracitydata.com
David Ferguson
Pro User
 
Posts: 799
Joined: Fri Nov 07, 2008 1:45 am
Location: Paso Robles, California

Re: Comm Problem between ECU and Dash Manager

Postby azhar on Tue Jan 16, 2018 7:26 pm

I tried to get it from Shared ECU,but there is a miscommunication for Neutral and Parking.
azhar
 
Posts: 6
Joined: Thu Dec 21, 2017 3:57 pm

Re: Comm Problem between ECU and Dash Manager

Postby adrian on Wed Jan 17, 2018 7:51 am

Hi Azhar,

Are you still having issues with the Gear status? Did you get a CAN log?

The package you have doesn't send vehicle speed on the CAN bus, you have to configure it in a different way. If you email me a copy of your package I'll show you how to set it up.

Adrian
adrian
MoTeC
 
Posts: 589
Joined: Mon Apr 13, 2015 4:16 pm


Return to ECU to Dash Comms

Who is online

Users browsing this forum: No registered users and 3 guests