CAN FD

information about how to make an ECU (MoTeC or non MoTeC) work with a MoTeC dash or data logger

CAN FD

Postby Slagathor on Thu Jan 17, 2019 1:04 pm

Does Motec have plans in the future to leverage the newer, high performance CAN FD Specification? For both ECU and Data, it seems this higher performance system (up to 12 Mbit/s) would offer huge advantages.
Slagathor
 
Posts: 7
Joined: Tue Nov 20, 2018 8:24 am

Re: CAN FD

Postby SDean on Fri Jan 18, 2019 10:44 am

Hi,

We are always investigating these new communication protocols and will implement them if we believe that they provide a benefit or fill a need of our customer base.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 746
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne

Re: CAN FD

Postby Slagathor on Mon Jan 21, 2019 7:44 am

SDean wrote:Hi,

We are always investigating these new communication protocols and will implement them if we believe that they provide a benefit or fill a need of our customer base.


I guess I understand why you may not want to answer the question.
Slagathor
 
Posts: 7
Joined: Tue Nov 20, 2018 8:24 am

Re: CAN FD

Postby mtobin1 on Thu Apr 11, 2019 11:50 pm

Are there any updates on a new CAN FD capable Data logger. I currently have 4 ACL units and 1 C125 logger. I work for an Automotive OEM and we are switching to the CAN FD structure in the near future. I rely on my ACL's all the time to acquire my CAN data. If Motec is in the development stages of a new datalogger that is great! Is there any current data logger units that can be purchased and upgraded in the future? i heard that I will not be able to upgrade my ACLs or C125. I am trying to get a ballpark price point so I can go to my management and get funds approved for a big Motec Purchase.

Any information you can pass on would be greatly appreciated.
mtobin1
 
Posts: 1
Joined: Sat Feb 23, 2019 4:27 am

Re: CAN FD

Postby David Ferguson on Fri Apr 12, 2019 1:10 am

I think the short term solution to CAN FD integration will be bridges such as these:

https://www.ixxat.com/products/products ... nt-200-420
David Ferguson
Veracity Racing Data
Check out Shift RPM - https://shiftrpm.veracitydata.com
David Ferguson
Pro User
 
Posts: 800
Joined: Fri Nov 07, 2008 1:45 am
Location: Paso Robles, California

Re: CAN FD

Postby SDean on Fri Apr 12, 2019 9:06 am

Hi Mtobin,

Can you send an email through to support @ motec.com.au regarding your specific needs for the CAN FD logging thanks.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 746
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne


Return to ECU to Dash Comms

Who is online

Users browsing this forum: No registered users and 1 guest