Syvecs to C125

information about how to make an ECU (MoTeC or non MoTeC) work with a MoTeC dash or data logger

Syvecs to C125

Postby bloit on Sun Apr 14, 2019 2:56 am

Hi. I’m looking for a can template to support syvecs ecu and c125 dash.
bloit
 
Posts: 13
Joined: Sun Nov 27, 2016 4:26 pm

Re: Syvecs to C125

Postby stevieturbo on Mon Apr 15, 2019 6:05 am

There is some for the Life racing stuff, which would be a good place to start.
[url=https://ohne-rezeptkaufen.de/]https://ohne-rezeptkaufen.de/[/url]
stevieturbo
 
Posts: 482
Joined: Fri Jul 11, 2008 2:32 am

Re: Syvecs to C125

Postby SDean on Mon Apr 15, 2019 9:28 am

Hi,

We had looked at doing a CAN Template for the Syvecs ECU's, but they do not appear to use a standard CAN Transmit template through their configurations so it becomes difficult for a base template to be made. They also allow for the base template to be changed quite easily.

As Stevie said, look at the Life Racing template and the cross reference the transmitted channels out of the Syvecs to see if they match up.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 748
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne

Re: Syvecs to C125

Postby bloit on Tue Apr 16, 2019 3:25 am

I’ll take a look at the F88 templates and go from there. Thanks for the advice.
bloit
 
Posts: 13
Joined: Sun Nov 27, 2016 4:26 pm

Re: Syvecs to C125

Postby stevieturbo on Thu Apr 18, 2019 3:29 am

One of their "standard" CAN datastreams from the Life site.

https://www.liferacing.com/uploads/file ... stream.pdf

I can only assume that Motec's Life F88 templates within the dash software are based around this ?
[url=https://ohne-rezeptkaufen.de/]https://ohne-rezeptkaufen.de/[/url]
stevieturbo
 
Posts: 482
Joined: Fri Jul 11, 2008 2:32 am


Return to ECU to Dash Comms

Who is online

Users browsing this forum: No registered users and 2 guests