L180 Loom

Part No: #62206

This is a high quality, ready populated loom allowing for the connection of analogue voltage inputs and analogue temperature inputs to your L180, quickly and easily. The loom has been made so that it can be customised to the vehicle installation.

L180 I/O Loom

Part No: #61259

This is a high quality, ready made loom that adds 6 analogue voltage inputs and 2 analogue temperature inputs to your L180 terminated loom, quickly and easily. The loom has been made so that it is simple to install, with minimal wiring required. Each of the eight 2 metre leads is individually twisted and heat shrunk for a professional finish.
 
To use this loom the optional L180 I/O Upgrade must be enabled.

Ethernet Cable

Part No: #61225

To configure the L180, a communication cable is required to connect to a PC. An Ethernet cable should be used to connect to the Ethernet port on the PC.

Mating Connector

Part No: #68086

79 pin Autosport connecter including sockets and insertion/extraction tool

SMS Module

Part No: #61286

The SMS Module, once fitted with a SIM card, allows mobile phone SMS text messages to be displayed on the screen.

Download datasheet

Custom USB Logging Cable A Panel/ Mini B

Part No: #61279

Required cable to allow a USB drive to be connected to the Display Logger.

Note: Requires the USB Logging enable (#29715)

MoTeC 32Gb Data Plug

Part No: #61280

High temp and vibration USB drive with a capacity of 32Gb, with locking ring for use in motorsport applications.

Note: Requires the USB Logging enable (#29715)

32Gb USB3 Flash Drive

Part No: #61292

High temp and vibration USB drive with a capacity of 32Gb allowing for days of continuous logging.

Note: Requires the USB Logging enable (#29715)

GPS

GPS-L10 Part No: #41304,  GPS-L5 Part No: #41305

GPS units can be used with the L180 for speed, position, track mapping and lap timing, plus date, time and GPS statistics.

Lap Timing

Part No: #15512

GPS units are often utilised as a cost effective method of lap timing (see above). The MoTeC BR2 Beacon Receiver is an alternative.

Sensors

A vast range available.

Lambda  Temperature   Pressure   Pitot   Crank, Cam and Speed   Position   Force and Motion  Switches

Expanders

E888 Part No: #14007,  E816 Part No: #14008

MoTeC's E888 or E816 Expanders can be connected to the C187 with full functionality.