Home > Products > Lambda Measurement > PLM
PLM
Connecting to the PC's Serial Port
Use a standard serial cable.
| Image | Product | Details |
 | Part No: | Serial cable |
Lambda Sensors:
| Image | Product | Details |
 | Part No: | Wideband 5 wire Lambda sensor Bosch LSU 4.9 |
 | Part No: | Wideband 4 wire Lambda sensor Bosch LSM |
 | Part No: | Wideband 5 wire Lambda sensor Bosch LSU (4.0) |
 | Part No: | Wideband 5 wire Lambda sensor Bosch LSU 4.2 |
 | Part No: | Wideband 5 wire Lambda sensor NTK UEGO |
PLM looms:
| Image | Product | Details |
 | Part No: | PLM Aux Output Adaptor Loom |
 | Part No: | PLM NTK Adaptor Loom |
 | Part No: | PLM Bosch LSU 4.0 Adaptor Loom |
 | Part No: | PLM Bosch LSU 4.2 Adaptor Loom |
 | Part No: | PLM Bosch LSU 4.9 Adaptor Loom |
 | Part No: | PLM Common Loom 2.6m |
 | Part No: | PLM Common Loom 6m |
Lambda Sensor Accessories:
| Image | Product | Details |
 | Part No: | Lambda Bung Mild Steel Weld-In 18 x 1.5 The sensor can be screwed into the stainless steel or mild steel ring. The rings contains a lip which makes welding to the exhaust pipe easier. The bung closes of the ring when there is no sensor mounted. |
 | Part No: | Lambda Bung Mild Steel Weld-In 18 x 1.5 The sensor can be screwed into the stainless steel or mild steel ring. The rings contains a lip which makes welding to the exhaust pipe easier. The bung closes of the ring when there is no sensor mounted. |
 | Part No: | Bosch LSU 4.0 Connector |
 | Part No: | Bosch LSU 4.9 Connector |
 | Part No: | M800 OEM Lambda Adaptor (300mm from OEM to DTM plug) |
 | Part No: | Lambda Extension Loom DTM6 to LSU 2.5m (suits 4.0 Lambda Sensor) |
 | Part No: | Lambda Sensor Extension Loom (for NTK E1) 0.55m |
 | Part No: | Lambda Connector Kit Bosch LSU 4.2 |
 | Part No: | 8 Pin Connector Kit for NTK UEGO Female |
 | Part No: | 8 Pin Connector Kit for NTK UEGO Male |
The PLM is available in a kit including all essential accessories.
