The MoTeC Logo
Welcome
Products
Downloads
Training
Forum
FAQ
Careers
Dealers
Products
The MoTeC Logo
Welcome Products Downloads Training Forum FAQ Careers Dealers
The MoTeC Logo
PLM
PLM
PLM
Part No: #15004

OVERVIEW

The quick and easy to use Professional Lambda Meter (PLM) measures the air fuel ratio over a wide range of mixtures with fast response time. It has the power and configurability required for both development and tuning of emission controlled vehicles and for use in motorsport.

Sensor Compatibility
  • Bosch LSU, 5 wire sensor
  • NTK UEGO, 5 wire sensor

BASIC SPECIFCATIONS

Inputs/Outputs
  • 2 x Digital inputs, user programmable as PLM-enable or RPM input
  • 1 x Analogue voltage output, user programmable from 0 to 5 V, provided as differential voltage ranging from –4.8 to 5 V
  • Power supply 7 to 16 V
  • Input current
    • 60 mA typical with backlight off
    • 110 mA typical with backlight on
    • plus sensor heater current (maximum 8 A)
Communications
  • 1 x CAN
  • 1 x RS232 for configuration only
Display
  • LCD 3.5 digit
  • Digit height 12.7 mm
  • Green LED backlight
Connectors
  • 2 x D9, 9 pin Dsub connector
Physical
  • Dimension 105 x 41 x 25 mm (excluding connector)
  • Weight 135 gram

FEATURES

General
  • CAN communications up to 1 Mbit
  • RS232 communication for configuration
  • Analogue output providing differential voltage
  • Maximum 8 ampere sensor heater
  • Multiple PLMs (up to 16) can be connected together
  • Available as part of complete Lambda measurement kits
  • Usable as an alternative to wideband Lambda upgrades in MoTeC ECUs and Dash Loggers
  • 2 x 9 pin Dsub connector
  • Robust aluminium enclosure
Measurement/Configuration
  • Compatible fuel:
    • Gasoline/petrol
    • Alcohol
    • LPG
    • Diesel
    • User defined 'blend' fuel
  • Comprehensive diagnostic and status channels
  • Calibration methods:
    • Automatic, using the sensor's built-in calibration resistor
    • Manual table entry
    • Known oxygen environment
    • Calibration constant
  • Standard configuration tables
  • Configurable to compensate for sensor aging and contamination
  • Accuracy +/– 1.5%
  • Operating range:
    • Lambda 0.7 to 32
    • AFR 10.3 to 470 for gasoline/petrol
    • Oxygen 0 to 22%
Display
  • Display configurable to show Lambda, Air Fuel Ratio or equivalence ratio
  • Flexible display setup configurable for
    • Resolution (decimal points)
    • Display update rate
    • Display filtering
    • Backlight intensity
  • Easy to read 3.5 digit LCD with 12.7 mm (½") digit height

SOFTWARE

This Windows-based fully updatable software is user-friendly with an intuitive menu structure and extensive help screens.

Download free of charge the latest version.

PLM Manager is used for configuration, calibration and general management of the PLM.

KITS

Include PLM, Lambda sensor, loom, adaptor loom, weld-in bung, serial cable to provide PC connection.

  • 15002 – PLM - KIT WITH NTK LAMBDA SENSOR 2.5 METRE
  • 15002LL – PLM - KIT WITH NTK LAMBDA SENSOR 6 METRE
  • 15006 – PLM: KIT WITH LSU 4.2 LAMBDA SENSOR 2.6 METER LOOM
  • 15006LL – PLM: KIT WITH LSU 4.2 LAMBDA SENSOR 6 METER LOOM
  • 15005 – PLM - KIT WITH LSU 4.9 LAMBDA SENSOR 2.5 METRE
  • 15005LL – PLM - KIT WITH LSU 4.9 LAMBDA SENSOR 6 METRES

ACCESSORIES

Cables

  • 61070 – PC TO ECU COMMUNICATIONS CABLE D9 - RS232 ONLY

Lambda Sensors

  • 57005 – BOSCH LSU 4.2 WIDEBAND LAMBDA SENSOR
  • 57006 – BOSCH LSU 4.9 WIDEBAND LAMBDA SENSOR
  • 57007 – NTK UEGO WIDEBAND LAMBDA SENSOR

PLM looms

  • 61105 – PLM NTK ADAPTOR LOOM
  • 61103 – PLM BOSCH LSU ADAPTOR LOOM
  • 61104 –
  • 61118 – PLM BOSCH LSU 4.9 ADAPTOR LOOM
  • 61106 – PLM COMMON LOOM 2.6 METRE
  • 61107 – PLM COMMON LOOM 6 METRE

Lambda Sensor Accessories

  • 59001 – LAMBDA BUNG MILD STEEL WELD-IN 18 x 1.5
  • 59002 – LAMBDA BUNG STAINLESS STEEL WELD-IN 18 x 1.5
  • 64010 – LAMBDA CONNECTOR KIT BOSCH LSU 4.9
  • 61044 – M800 PLUG-IN LAMBDA LOOM
  • 61220 – LAMBDA SENSOR EXTENSION LOOM FOR NTK E1 0.55 METRES
  • 64009 – LAMBDA CONNECTOR KIT BOSCH LSU 4.2
  • 65042 – 8 PIN CONNECTOR KIT FOR NTK UEGO FEMALE
  • 65085 – 8 PIN CONNECTOR KIT FOR NTK UEGO MALE

PURCHASING

If you are interested in purchasing this product contact an Authorised MoTeC Dealer.

DOWNLOADS

User Manuals & Guides
Name
Version / Part
Published
Download
Name, Version / Part, Published
Name
Version / Part
Published
Download
PLM Quick Start Guide
15004
Apr 2010
Download
PLM Quick Start Guide
15004
Apr 2010
PLM Quick Start Guide
15004
Apr 2010
Download
PLM User Manual
15004
Jun 2005
Download
PLM User Manual
15004
Jun 2005
PLM User Manual
15004
Jun 2005
Download
Useful Links

This page shows the relevant downloads for this product. For a full selection of MoTeCs downloads visit the Downloads page.

 

To keep up-to-date with the latest webinars or software you can subscribe to our mailing lists and we will send you a message when new items are released.

To sign-up for a mailing list click the "SIGN-UP: WEBINAR NEWS" or "SIGN-UP: SOFTWARE RELEASE" button below.

OVERVIEW

BASIC SPECIFCATIONS

FEATURES

SOFTWARE

KITS

ACCESSORIES

PURCHASING

DOWNLOADS