motec

Part No: #61140

OVERVIEW

The KTC (K-Line to CAN) adaptor converts CAN data to ISO 9141 K-Line data with specific formats to facilitate communication between MoTeC 'hundred series' ECUs and existing dashboards in Yamaha and Kawasaki PWCs (Personal Water Craft).

FEATURES

Enables available dash functions including RPM, boost pressure and dashboard alarms (e.g. engine temperature, muffler temperature, oil pressure, EFI fault)
Transmits pre-defined CAN messages to K-Line format
Resin filled, machined, anodised aluminium case with through hole fastening
Flying lead

SPECIFICATIONS

Inputs

Power supply 12 V (9 - 16 VDC)

Communications

1 x K-Line
- ISO 9141 standard interface with internal protection
- Baud rate dependent upon selected application
1 x CAN
- Fixed address (0x600, 0x601)
- 1Mbit/sec baud rate

The KTC device is not userconfigurable. Different applications may require firmware upgrades to allow additional formats.

Physical

Case size 38 mm x 14 mm x 26 mm excluding lead

The KTC is wired onto the CAN bus. Please ensure the CAN bus includes at least one 100R terminating resistor.

COMPATIBILITY

MoTeC ECU Models

M84, M400, M600, M800, M880, M1 Series

PWC Compatibility

Kawasaki JT1500 series:
- JT1500B, JT1500F (Ultra 250x)

Yamaha Waverunner series:
- FXSHO/FZR/FZS

PINOUT

6 Pin Connector

Mating connector # 68056

Pin	Colour	Name
1	Black	Ground (Battery -)
2	Blue	K-line Transmit
3		Not used
4	Green	CAN Low
5	White	CAN High
6	Red	+ 12 V (Battery +)

PURCHASING

If you are interested in purchasing this product contact an Authorised MoTeC Dealer.

DOWNLOADS

Useful Links

This page shows the relevant downloads for this product. For a full selection of MoTeCs downloads visit the Downloads page.

To keep up-to-date with the latest webinars or software you can subscribe to our mailing lists and we will send you a message when new items are released.

To sign-up for a mailing list click the "SIGN-UP: WEBINAR NEWS" or "SIGN-UP: SOFTWARE RELEASE" button below.