• Pre-configured sensor calibrations for Original Equipment (OE) sensors.  
• Pre-configured reference mode for engine synchronisation.  
• Pre-configured physical settings for engine displacement, fuel density, stoichiometric ratio, fuel pressure, and injector characterisation, which allow for simplified engine start-up prior to tuning.  
• Pre-configured control of high pressure pump.  
• Smoke Limiting by means of a Fuel Mass Limit table or Minimum Lambda table.  
• Pre-configured coolant temperature compensations for engine speed limit, fuel mass limit, fuel timing, boost limit.  
• Engine Load Average channel with tables for engine speed limit and boost limit.  
• Pre-configured engine start fuel volumes.  
• Pre-configured boost control of OE VNT servo motor.  
• Pre-configured turbocharger bypass control.  
• Pre-configured Swirl Control via 2 switchable inlet manifold flap outputs.  
• Pre-configured pulsed tachometer output.  
• Configurable Intercooler temperature and spray control.  
• Configurable launch control with tables for engine speed, boost aim and fuel mass limit.  
• Configurable Traction control with tables for aim main, aim compensation, control range.  
• Configurable closed loop alternator system for OE alternator.  
• Configurable coolant fan output with support for 1 aftermarket coolant fan output (PWM controlled).  
• Configurable coolant pump output with PWM control.  
• Configurable coolant pump after-run functionality, optionally with additional pump output.  
• Configurable air conditioner control.  
• Configurable fuel pump switched output.  
• Configurable gearbox position detection.  
• Configurable gearbox shift request.  
• Configurable vehicle speed measurement using wheel speed sensors.  
• Gearbox shift support with fuel mass limit, throttle blip and engine speed matching in forward gears.  
• Transmission pump output with transmission temperature threshold and hysteresis control.  
• Differential pump output with differential temperature threshold and hysteresis control.  
• 8 configurable driver switches and 8 rotary switches each with 10 positions that can be simultaneously mapped to launch control, pit switch, anti-lag, traction, race time reset, engine speed limit maximum, throttle pedal translation, fuel volume trim, ignition timing, fuel mixture aim, boost limit, traction aim, and traction control range.  
• Vehicle speed limiting (pit speed control).

For a full list of features download the Datasheet